SCF's 10ft Dangerous Goods container is the storage solution that allows you to remove your hazardous goods from your everyday workspaces and store them in an external, compliant, secure and lockable area.

10ft Dangerous Goods
SCF's 10ft Dangerous Goods container is the storage solution that allows you to remove your hazardous goods from your everyday workspaces and store them in an external, compliant, secure and lockable area.
Product Details
SCF's 10ft Dangerous Goods Container is the ideal solution for storing dangerous chemicals, liquids or powders onsite in small workshops, with limited onsite space or difficult access.
Key safety features include ventilation grills at the top and bottom levels of the walls, a safety drain valve and emergency escape internal release handle at the exit door.
All SCF Dangerous Goods Containers are designed to comply with the applicable Australian Standards and certified as a detached store. Built with galvanised steel flooring, bund to contain spills, raised cross-members to simplify the clean-up of spills and an emergency exit to ensure no one gets locked in.
Upon delivery, each customer will receive an Independent Certificate of Compliance.
-
Flexible storage for chemical classes 3, 4.1, 4.3, 5.1, 6.1 and 8 (subject to MSDS compliance)
-
Bunded to contain spillages
-
Multiple top and bottom vents for air circulation
-
Level entrance for added safety
-
316L safety drain valve
-
Bund capacity from 1,100L to 1,300L



10ft Dangerous Goods Container Dimensions and Weight
Specifications may vary
Internal Capacity - 17.4m3
Bunding Capacity - 1.1 - 1.3m3



Key Features
- Flexible storage for chemical classes 3, 4.1, 4.3, 5.1, 6.1 and 8 (subject to MSDS compliance)
- Bunded to contain spillages
- Multiple top and bottom vents for air circulation
- Level entrance for added safety
- 316L safety drain valve
- Bund capacity from 1,100L to 1,300L
How is this container delivered?
To make delivery as smooth as possible, please notify us when getting a Dangerous Goods quote if there are any obstacles on or near your site that could impact a truck's access.
Also, please make sure that the area the truck will need to access is clear.
Tilt Tray
This is the most common method. We tilt the truck’s tray, then slide the container off while the vehicle slowly moves forward. Just note that the container’s height will increase when it’s tilted – so if your site has overhead obstacles (like power lines) we may need to go with another method.
Hiab Crane
We use Hiab cranes when there’s not enough space for a side loader or tilt tray – or if your site has other tricky obstacles to manoeuver around (like fences). The crane lifts and then places the shipping container. This method also makes it easy to place containers at an angle, or on raised areas.
FAQ
Internal measurements of the 10ft Dangerous Goods Container are 2,840mm (L) x 2,348mm (W) x 2,622 (H)
Chemicals, corrosives and flammables within classes 3, 4.1, 4.3, 5.1, 6.1 and 8 (subject to MSDS compliance).
A 10ft Dangerous Goods Container can hold 17.4m3, making it a perfect size if you need just a little bit more storage on site for your chemicals, corrosives and flammables.